- GST NO. : 24AACPM8952F1ZO
| No Item Found... |
ESD Compliance Products
Leading Wholesaler, Distributor and Trader of 838AR Total Ground Carbon Conductive Coating Paints, 839 Super Shield Graphite Conductive Paint and 844AR Liquid ESD Safe Coating from Ahmedabad.
| Business Type | Supplier, Retailer |
| Type | Conductive Coating |
| Material | Solvent-based Acrylic Lacquer, Carbon Powder |
| Adhesion | Strong |
| Dry Time | Quick |
| Application | RFI Shielding, Adhesion To Plastics, Corrosion Resistance |
| Corrosion Resistance | Strong |
| Safety | HAP Free (No Toluene Or Xylene) |
| RFI Shielding | >52 DB At Frequencies <1 MHz |
| Application Method | Brush Or Spray |
This carbon paint consists of a 1-part,
| Business Type | Supplier, Retailer |
| Application | Conductive, Static-free Surfaces, EMI/RFI Shielding |
| Type | Acrylic Paint |
| Material | Graphite Filler |
| Finish | Smooth, Durable |
| Resistance | Abrasion, Oxidation, Extreme Thermal Cycling |
| SuitableFor | Outdoor Use, Common Plastic Surfaces |
| Coating | Tough, Durable, Weather Resistant |
839 is an economical acrylic paint that uses a graphite filler to create conductive, static-free surfaces. This anti-static material reduces low-frequency EMI/RFI. It cures to a smooth, durable finish and is resistant to abrasion, oxidation, and extreme thermal cycling, making it a suitable choice for outdoor use. It is a general-use conductor to provide low-cost EMI/RFI shielding. It can be used where it is necessary to impart conductivity on common plastic surfaces, making it suitable for shielding against low frequencies.
- High conductivity—low surface resistivity
- Tough and durable coating, salt spray tested with excellent weatherability
- Repairable and removable
- Stronger adhesion than water-based coatings
- Corrosion-proof—slows or prevents substrate oxidation
- Rub off resistant
| Business Type | Supplier, Retailer |
| Type | ESD-safe Coating |
| Material | Acrylic-based |
| Color | Pigmented With Low Conductivity Pigments |
| Usage | Static Dissipative Coating For Plastics |
| Drying Time | Quick-dry |
| Adhesion | Strong Adhesion With Excellent Flexibility |
| Chemical Composition | Does Not Contain Toluene, Xylene Or MEK |
This ESD-safe coating for plastics is a one-part, solvent-based, acrylic-based ESD-safe coating pigmented with low conductivity pigments. It adheres to many conventional plastic substrates and paint systems. The cured coating is flexible, durable, and will not crack, chip or peel. The coating can be cured at room temperature or higher.
- Permanent static dissipative coating
- Quick-dry
- Strong adhesion with excellent flexibility
- Low VOC and HAP-free
- Does not contain toluene, xylene or MEK
