Adhesives

9310 a is general purpose, one-part epoxy adhesive. It is smooth, thixotropic, self-levelling, and bonds well to a wide variety of substances. It has an unlimited working life at room temperature and does not require frozen storage.

• Minimum cure temperature of 100 °C [212 °F]
• Unlimited working life
• Shelf life: 2 years at room temperature
• Provides strong electrical insulation
• Tg of 113 °C [235 °F]
• Strong resistance to humidity, salt water, acids, bases, and aliphatic hydrocarbons

his electrically conductive paste is a 2-part heat-cured epoxy with a long working time. This electrically conductive glue is smooth, non-sagging, and bonds well to a wide variety of substrates. The adhesive passes outgassing specification ASTM E595

• Meets NASA low outgassing standard
• High electrical conductivity
• Convenient 1 to 1 mix ratio
• Working time: 4 hours
• Cure time: 2 hours at 65 °C (149 °F) or 30 minutes at 100 °C (212 °F)
• Creates strong permanent electrical connections
• Excellent adhesion to many substrates
• Room temperature storage
• Long shelf life
• Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons

Fast Set Epoxy is a 2-part, 1 to 1 epoxy adhesive with a five-minute working time. Bonded parts need only be held together for eight to ten minutes before they are sufficiently set for handling. This quick set epoxy offers excellent adhesion to a wide range of materials that are difficult to bond with, including glass, fiberglass, concrete, ceramics, china, tile, wood, and most metals and plastics.

• Quick set epoxy glue
• Set time: 8 to 10 minutes
• Cure time: 5 hours at room temperature or 15 minutes at 65 °C
• 1:1 mix ratio
• Tensile strength of 5 000 psi
• Low shrinkage
• Provides strong electrical insulation
• Protects against thermal and mechanical shocks
• Strong resistance to humidity, salt water, acids, bases, and aliphatic hydrocarbons