Super Shield Nickel Conductive Coating (841)

We are a major Supplier of Super Shield Nickel Conductive Coating (841) in Maharashtra, India. This 841 Super Shield Conductive Coating, reduces the electromagnetic or radio frequency interference (EMI/RFI), an issue for all electronic devices. It is a durable acrylic coating, pigmented with a high purity nickel flake and is UL approved for adhesion to ABS and polycarbonates at hot and cold temperatures.
It is designed to be applied to the interior of plastic electronic enclosures. It is a simple way to deal with EMI/RFI issues, allowing devices to pass FCC emission testing.

Features :

• UL Recognized (File # E202609)
• Tested in compliance with IEEE Std. 299-1997
• High Conductivity
• Tough and durable coating
• Stronger adhesion than water based coatings
• Low VOC's
• Median attenuation 50 dB ±25 dB per 38 ¼m (~1.5 mil) for frequency range of 10 to 18,000 MHz

Applications & Usages :

• Its primary applications are in cell phones, PDA's, other consumer electronics, telecommunication equipment, industrial equipment, medical devices, military devices, and aerospace equipment.
• It can also work well on drywall, and can be used to shield entire rooms.

Important Usage Info : 841 AerosolProduct must be vigorously shaken (approx. 2 minutes AFTER you hear the marble inside) prior to use and periodically during the use. After use, invert the can and spray to clear nozzle prior to storing.

Compatibility :

• Adhesion The 841 coating adheres to ABS, PBT, and most materials found on printed circuit assemblies; however, it is not compatible with contaminants like water, oil, and greasy flux residues that may affect adhesion.
• If contamination is present, clean the surface to be coated first.