Electronic Cleaners

HFE Solvent Cleaners (411) that we supply from Mumbai, Maharashtra (India) are known for their 100% Non-conductivity. These cleaners are used when requiring an absolute non-flammable, non-toxic and plastic safe cleaner degreaser. It cleans the energized circuits, contacts, motors and other electronic equipment. Approved by SNAP without restrictions these cleaners are extra effective with the use of M.G. Cat. 852 and 853 Hog Hair cleaning brushes. Clients can buy these HFE Solvent Cleaners (411) from us at competitive prices.

We are the leading suppliers of Immersion Super Solvent Cleaner (8260) to our clients across India. This cleaner is excellent for wipe cleaning, ultrasonic cleaning, and parts bath cleaning. Slow evaporation makes this product perfect for open air immersion cleaning. Being very human safe and biodegradable makes this a very environment-friendly choice. It is strong enough to easily strip most conformal coatings, uncured epoxies and adhesives, oils and greases. Great for cleaning parts or tools, it is conductive, combustible, non-toxic and low in cost. Immersion Super Solvent Cleaner (8260) is a super strong, low odour, a slow evaporating solvent that is highly effective in degreasing applications.

Features :

• Low flammability
• Extremely slow evaporation
• Safe on most plastics
• Low toxicity
• Bio-degradable

Directions

• Test on plastics before using. Substrates can be cleaned by either immersion or spraying.
• Heating is not necessary. Ultrasonics can increase the cleaning performance.

Progressive Engineers is supplier of Mg Chemicals Isopropyl alcohol. This is 99.9% ACS reagent grade isopropyl alcohol for cleaning electronics. It is a flammable clear solvent that effectively cleans ionic, polar and non-polar residues.

It is safe on most painted surfaces, plastics, and elastomers. It leaves no residue, evaporates quickly relative to water, and does not cause corrosion. It is low toxicity compared to alternative solvents and is similarly relatively environmentally benign, being ozone safe with excellent “green solvent” scores.

This 99.9% IPA is both anhydrous, hydroscopic, and fully miscible with water, so it can be used to scavenge moisture and dehumidify surfaces. It also has a low surface tension, so it wets easily, making it an effective cleaner.

This product is listed by the NSF as acceptable for use as a solvent for cleaning electronic instruments and devices, which will not tolerate aqueous solutions, in and around food processing areas where its use is not intended for direct food contact.

Choose us and order now.

We are involved in supplying to our clients a general all-purpose cleaner named Isopropyl Alcohol Cleaner 824 (Aerosol) at a reasonable price across the country. It is a quick drying light-duty degreaser for use in industrial, electrical, electronic and aviation applications. Its 99% pure formula aggressively dissolves grease, dust, dirt, lint, oils, and flux from most non-plastic surfaces. For use on PC boards, connectors and contacts, fiber optics, semiconductors, printed circuit boards, tape heads, light oils, office and medical equipment, relays, flux.

Product Features :

• Safe on plastics
• 99.9 Percent pure anhydrous
• Low toxicity
• Perfect for use on fiber optics
• In compliance for use in Food Plants Food contact surfaces are to be rinsed with water prior to reuse and avoid food contamination during its use and storage.

We are involved in supplying to our clients a general all-purpose cleaner named Isopropyl Alcohol Cleaner (824) at a reasonable price across the country. It is extra effective with the use of M.G. Cat. #'s 852 and 853 Hog Hair cleaning brushes. It is sourced from our esteemed vendors, who use the premium grade materials and updated techniques for manufacturing it. It is in conformity with the latest industrial standards and norms.

Features of Isopropyl Alcohol Cleaner (824) :

• Safe on plastics
• 99.9 Percent pure anhydrous
• Low toxicity
• Perfect for use on fiber optics

Isopropyl Alcohol Cleaner (824) can be used on :

• PC boards
• Connectors & contacts
• Fibre optics
• Semi-conductors
• Printed circuit boards
• Tape heads
• Light oils
• Office & medical equipment
• Relays
• Flux

We are the leading suppliers of Safety Wash II Aerosol Cleaner (4050A) across India to our clients for cleaning purpose. It is an improved special blend of isohexane, ethyl alcohol, isopropanol, and ethyl acetate. Strong enough to clean, grease, oil, smoke, ink, organic and inorganic soils. An excellent choice when a cleaner slightly more aggressive than IPA is needed. It is extra effective with the use of M.G. Hog Hair Cleaning Brushes (Cat. No. 852 and 853). In compliance for use in Food Plants, Food-contact surfaces are to be rinsed with water prior to reuse and avoid food contamination during its use and storage. Best quality at a reasonable price is assured for the product.

We are the leading suppliers of Safety Wash Liquid Cleaner (4050) across India to our clients for cleaning purpose. Safety Wash Liquid Cleaner (4050) is a special blend of ethyl alcohol, isopropanol, and ethyl acetate. Strong enough to clean, grease, oil, smoke, ink, organic and inorganic soils. It is an excellent choice when a cleaner slightly more aggressive than IPA is needed. It is extra effective with the use of M.G. Cat 852 and 853 Hog Hair cleaning brushes. We supply this Safety Wash Liquid Cleaner (4050) from our facility in Mumbai, Maharashtra at a reasonable price.

Our company is involved in supplying Super HFE Electronics Cleaner (4120). We have reformulated our existing HFE blends with a newly developed solvent that allows us to maintain the cleaning power, non-flammability, non-conductivity, and environmental friendliness while dramatically reducing the cost. Super HFE Electronics Cleaner (4120) can be effectively used for removing flux, greases, oils, oxides, silicones, carbon, dirt, smoke film and grime, where a non-flammable, non-conductive solvent is required. Test for plastic compatibility before use. It is extra effective with the use of M.G. Hog Hair Cleaning Brushes (Cat. No.'s 852 and 853).

Features :

• Non-flammable
• Non-conductive
• Non-corrosive
• Excellent cleaning strength
• Fast dry
• Leaves no residue
• Environmentally friendly
• 100% ozone safe
• Significantly lowers cost compared to standard HFE blends

We are the leading suppliers of Superwash Electronics Cleaner (406B) to our clients at reasonable prices. Superwash Electronics Cleaner (406B) is used when a rapidly drying cleaner degreaser is required. It is perfect for quickly cleaning PC boards. Rapid dry time makes this product an excellent product for rinsing away other slower drying solvents. Great for rinsing dissolved flux. Extra effective with the use of M.G. Cat.#'s 852 and 853 Hog Hair cleaning brushes. Cleans and degreases printed circuit boards, machinery, electrical and electronic devices.

Features :

• Safe on plastics
• Non-conductive
• Zero residues
• Fast evaporation
• 100% Ozone safe
• Safe for workers
• Dissolves light oils and residue
• Variable valve allows user to control rate of flow
• Flammable - do not use on live circuits