Conformal Coating Stripper ( 8310)

We are counted amongst the significant Suppliers of Conformal Coating Stripper (8310). We carry out our operations from Maharashtra, India. It efficiently removes the protective coatings including epoxy, urethane, silicones, and acrylics. Our offered Conformal Coating Stripper (8310) also removes carbon, tar, adhesives, rubber, and some plastics.

Features :

• Extra Strength
• Non-flammable
• Non-drip (gel type)
• Safe on metals
• Avoid contact with skin

Prerequisites :

• Wiping cloth
• Non-abrasive brush
• Solvent-based PCB Cleaner (Safety Wash Part # 4050-1L)

To remove the Conformal Coating :

• Apply a liberal amount of stripper with the 8310 cap brush.
• Let sit about 30 minutes or until the coat has softened.
• (Optional) Use a non-abrasive brush or tool to remove most of the stripper, and then gently wipe surface with a clean cloth dampened with an organic PCB cleaner.
• Rinse with PCB cleaner or isopropyl alcohol to remove the remaining stripper.
• Repeat steps 1 to 4 if necessary.