Optically Clear Epoxy (8322)

We are an eminent Supplier of Optically Clear Epoxy (8322). Our 8322 Optically Clear Epoxy offers a very strong and UV-resistant finish. This two-part coating is simple to mix and use, as it does not require any special or costly equipment to apply. The 8322 epoxy protects against the static discharges, shocks, vibrations, and mechanical impacts. It insulates against heat and conductivity. It is extremely resistant to the environmental humidity, salt water, and many harsh chemicals.

Features :

\n
• Excellent Chemical Resistance
\n
• Extreme resistance to water and humidity
\n
• Optically Clear: Transmission @25 µm [1 mil]
\n
• UV light stable: Non-yellowing
\n

Details :

\n
• Follow the procedure below for best results. If you have little or no experience with the 832C epoxy, please follow the long instructions instead.
\n
• The short instructions provided here are not suitable for first time users.
\n

To prepare 4:1 (A:B) Epoxy Mixture :

\n
• Stir the Part A container to ensure its homogenity.
\n
• Measure four parts by volume of the pre-stirred A, and pour in the mixing container.
\n
• Measure one part by volume of Part B, and slowly pour in the mixing container while stirring.
\n
• Let sit for 30 minutes to de-air.
\n
• If bubbles are present at top, use the mixing paddle to break them up and stir gently once more.
\n
• Pour mixture 0nto the surface or cavity.
\n

To Cure the Conformal Coating : Full cure can be achieved in 2 hours in an oven at 80 °C [176 °F]. Let stand at room temperature for an additional 30 minutes.